The Dri-Belt™ Sludge Dewatering System has been designed for the continuous filtration of large volumes of sludge in a wide variety of industries.
Technical Details
Dri-Belt™ Sludge Dewatering System
Performance
The table below shows typical performance figures for the Dri-Belt™ System in a variety of applications, given on a per metre belt width basis.
| Sludge Type | Feed Solids % D.S. | Cake % D.S. | Throughput m3/hr/m |
|---|---|---|---|
Surplus Activated |
1.0 - 4.0 |
18.0 - 25.0 |
5 - 15 |
Primary |
2.0 - 6.0 |
25.0 - 38.0 |
15 - 25 |
Co-Settled P & S |
2.0 - 5.0 |
25.0 - 34.0 |
10 - 22.5 |
Digested |
3.0 - 5.0 |
24.0 - 32.0 |
7.5 - 20 |
Potable Water |
1.5 - 4.0 |
17.0 - 28.0 |
5 - 10 |
Paper Mill |
2.0 - 5.0 |
30.0 - 45.0 |
10 - 25 |
Industrial Sludges |
2.0 - 5.0 |
55.0 - 85.0 |
10 - 25 |
Sludge can vary considerably and these figures are intended as a guide only.
Technical Data
Dri-Belt™ Systems are available in seven configurations, specific to your application.
| Item | Dri-Belt™ Model | |||||||
|---|---|---|---|---|---|---|---|---|
| 500 | 650 | 1000 | 1500 | 2000 | 2500 | 3000 | ||
Power Requirement (KW) |
For Driving Motor |
0.4 |
0.4 |
0.75 |
1.5 |
1.5 |
2.2 |
2.2 |
Compressor |
0.4/0.75 |
0.4/0.75 |
0.4/0.75 |
0.75 |
0.75 |
0.75 |
0.75 | |
Belt Width (mm) |
500 |
650 |
1000 |
1500 |
2000 |
2500 |
3000 | |
Overall Dimensions |
L (mm) |
4620 |
4620 |
4620 |
4880 |
4880 |
4900 |
4900 |
W (mm) |
1080 |
1230 |
1580 |
2170 |
2650 |
3340 |
3940 | |
H (mm) |
2310 |
2310 |
2380 |
2700 |
2700 |
2725 |
2725 | |
Installed Weight (kg) |
1950 |
3200 |
3200 |
5200 |
7300 |
11400 |
13500 | |
